LED COB RGBW 784 LED/m 24 V IP20 – 19 W/m, PCB 12 mm W-4000K or W-6000K)

LED COB RGBW 784 LED/m 24 V IP20 – 19 W/m, PCB 12 mm (W = 4000 K or 6000 K)

This analogue LED strip with Chip-on-Board (COB) technology combines an ultra-high density of 784 LED/m with a full RGBW palette and two practical white variations. The 4000 K version offers a neutral shade that faithfully reproduces the colours of displays in shops, showrooms or office spaces. The 6000 K variant, on the other hand, guarantees a cool, contrasting glow, perfect for work zones, laboratories and minimalist high-tech arrangements. The COB design eliminates visible spots, so even when installed in shallow profiles, you get a perfectly continuous line of light – an effect that interior architects and installers of ‘LED ceiling lighting’ systems will appreciate.

The 12 mm wide double-layer PCB improves heat dissipation, and the 24 V DC power supply stabilises brightness across the entire 10 m roll, reducing voltage losses typical of 12 V tapes. The 19 W/m consumption translates into high luminous flux (up to ≈ 780 lm/m in the white channel), while maintaining reasonable energy efficiency. The factory-applied 3M coating allows permanent and fast installation on aluminium, MDF or furniture surfaces. The IP20 rating denotes interior applications only: stretch ceilings, lighting niches, shop displays, hotel receptions or RTV housings. For colour control, we recommend the four-channel 24 V RGBW controllers, which allow smooth colour changes, dimming and the storage of light scenes without the need for pixel programming.

• ✅ COB technology – uniform, “dot-less” line of light
• ✅ 784 LED/m – maximum luminance uniformity
• ✅ RGBW with W-channel 4000 K or 6000 K – design flexibility
• ✅ 24 V DC – stable brightness over long distances
• ✅ 19 W/m – high flux at reasonable power
• ✅ 12 mm PCB – full compatibility with LED profiles of ≥12 mm
• ✅ 3M tape – fast, secure fixing
• ✅ IP20 – indoor installations

Recommended profiles

• ✅ GAMMA 20 LED profile for stretch ceilings – compact surface mounting
• ✅ GAMMA 30 profile – greater depth, better cooling
• ✅ MODEL ST profile – low edge, height saving
• ✅ S IGMA-NEO LED profile – niche profile with space for power supply unit

Diffusers

• ✅ Flexible cover DF-G.20 – for 20 mm profiles
• ✅ Flexible cover DF-G.30 Gamma 30 – deeper diffusion
• ✅ Hard cover DH-G.30 Gamma 30 – damage resistance

Power supply and control

• ✅ 24 V LED power supplies – min. 210 W per 10 m of strip
• ✅ MI-LIGHT FUT037s+ 3in1 controller – analogue RGBW control
• ✅ 4-channel dimmers – smooth colour mixing

Alternative LED strips

• ✅ LED COB CCT 608 LED/m 24 V IP20 – 16 W – fluently adjustable white, COB
• ✅ LED COB 320 LED/m 24 V IP20 – 10 W / 14 W – lower density, same technology
• ✅ LED strip Hi-Eff 192 LED/m 24 V SMD-2835 IP20 – 14 W / 20 W – higher CRI, analog RGBW with white

When you choose the LED COB RGBW 784 LED/m with 4000 K or 6000 K white, you get a smooth, uninterrupted line of light, high efficiency and full colour control – without the need for pixel control. A reliable and professional solution that will enhance the prestige of any B2B installation.